What to Do If Your Carbon Monoxide Detector Is Beeping

Four beeps and a pause means CO is present. Here are 6 other things that might make your CO alarm go off too.

Some or all of the mortgage lenders featured on our site are advertising partners of NerdWallet, but this does not influence our evaluations, lender star ratings or the order in which lenders are listed on the page. Our opinions are our own. Here is a list of our partners.

Published · 1 min read
Profile photo of Dalia Ramirez
Written by Dalia Ramirez
Lead Writer
Profile photo of Tina Orem
Edited by Tina Orem
Assistant Assigning Editor
Fact Checked

If your carbon monoxide alarm is going off continuously with four short beeps at a time, assume it’s detecting carbon monoxide. Do not ignore the alarm. All people and animals should leave the area and find fresh air. Call 911 to report that the carbon monoxide alarm is going off. It’s better to be safe than sorry, especially since CO isn’t visible like smoke is.

How does a carbon monoxide detector work?

Carbon monoxide detectors alert you if they detect carbon monoxide (CO), which is a colorless, odorless gas produced by fuel-burning devices. The detectors typically look like smoke alarms and emit a high-pitched siren alarm when they sense the gas. Carbon monoxide can be deadly when inhaled.

🤓Nerdy Tip

Some home security systems come with carbon monoxide and/or smoke alarm listeners that connect to a smart home app and send you phone notifications if your detector goes off.

What to do if your carbon monoxide alarm keeps going off

1. Check for symptoms of carbon monoxide poisoning

If your CO alarm is continuously going off with a high-pitched sound or making four short beeps at a time with a few seconds in between, that means it’s detecting carbon monoxide in the air and it’s an emergency alert. Check for symptoms of carbon monoxide poisoning.

The symptoms of carbon monoxide exposure appear like flu symptoms: headaches, nausea, dizziness, difficulty breathing, chest pain, confusion and vomiting

Mayo Clinic. Carbon monoxide poisoning. Accessed Sep 9, 2024.
. If you hear the emergency alert and if anyone in your household is experiencing these symptoms, leave your home immediately and call 911. If you have pets, take them with you, as animals can also experience CO poisoning.

2. Change the batteries

Carbon monoxide detectors often chirp or beep once every minute when the device’s batteries need to be replaced. Your alarm may also have LED lights that indicate the battery level.

3. Reset the device

If you’re sure your detector is setting off a false alarm and you want to turn the beeping off, you can reset the device by holding down a “reset” or “silence” button for 10 seconds (the button label and hold time might vary by manufacturer). A light on the device should blink or the device should beep when it’s been reset. If you have a smart alarm, you may be able to reset the device with your phone.

4. Replace the device

Depending on the manufacturer, carbon monoxide detectors may beep every 30 seconds or a few times a minute when they need to be replaced completely or are malfunctioning

. Carbon monoxide detectors have a lifespan of about five to seven years.

Depending on the manufacturer, the device might also display an “ERR” or “END” message if it’s near the end of its life. Replacing the batteries will not fix the beeping

CDC.gov. Carbon Monoxide Poisoning Basics. Accessed Sep 9, 2024.
.

5. Move the detector

Fireplaces and gas stoves can produce small amounts of carbon monoxide that can set off a detector

Minnesota Department of Health. Carbon Monoxide (CO) Poisoning in Your Home. Accessed Sep 9, 2024.
. It may make sense to move your device away from these heat sources.

6. Clean your detector

Dust buildup can block your detector’s sensors and make the alarm go off. Find your detector manufacturer's instructions for cleaning your alarm. Some manufacturers recommend cleaning the detector regularly with a cloth or canister of compressed air for electronics but not water or liquid cleaners, for example.

Frequently asked questions

Carbon monoxide is a gas that occurs when carbon fuels such as wood, gas and oil aren’t fully combusted. It can be produced by any of the following common sources in a home:

  • Gas and oil-burning furnaces.

  • Gas refrigerators.

  • Gas and wood fireplaces.

  • Water heaters.

  • Gas ovens and stovetops.

  • Clothing washers and dryers.

  • Space heaters.

  • Cars and other vehicles.

  • Power tools, such as chainsaws and power washers.

  • Cigarettes indoors, especially with poor ventilation.

Never use a gas-powered generator or a grill indoors. Do not use a gas oven to heat your home. These tactics can produce deadly quantities of carbon monoxide. Also, never leave a car running in a garage attached to the house.

According to the Environmental Protection Agency (EPA), you should have a CO detector on every floor of your home and near sleeping areas.

Carbon monoxide detectors are mandatory for buildings in 26 U.S. states and the District of Columbia. The U.S. Consumer Product Safety Commission (CPSC) recommends that every home has one, even if you live in a state that doesn’t require CO detectors.

Because carbon monoxide isn’t visible — it’s nicknamed the “silent killer” — a detector can be the only way to keep you and your family safe from the gas. According to the Centers for Disease Control and Prevention (CDC), more than 100,000 people visit the emergency room due to accidental CO poisoning every year.

NerdWallet's Best Home Security Systems
Our top picks for 2024 are customizable, affordable and packed with useful features.
Get more smart money moves – straight to your inbox
Sign up and we’ll send you Nerdy articles about the money topics that matter most to you along with other ways to help you get more from your money.